Versions Compared

Old Version 5

changes.mady.by.user Cory Lyle

Saved on

compared with

New Version 6

changes.mady.by.user Cory Lyle

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Scan the factory default barcode for the model of scanner. Default barcodes found below; Scanner Factory Default Barcodes.

  2. Unplug the scanner from the computer and wait 5 seconds.

  3. Plug the scanner back into the computer.

  4. Scan the programming document for your specific scanner. Programming barcodes found below; Scanner Programming Barcodes.

  5. Again, unplug the scanner from the computer and wait 5 seconds.

  6. Plug the scanner back into the computer.

Check control panel, it should show as a keyboard at the top.

Info

Open the notepad application from the computer start menu. Perform a test scan in notepad, the scan results should return and display similar to below:

<COUPON>

...

  1. Unplug the connection cable from the cradle to computer.

  2. Scan the factory default barcode for the model of scanner. Default barcodes found below; Scanner Factory Default Barcodes.

  3. Put the scanner on the cradle to pair the scanner to the cradle

  4. Scan the programming document for your specific scanner. Programming barcodes found below; Scanner Programming Barcodes.

  5. Put the scanner on the cradle to resync the scanner and cradle

  6. Plug in the connection cable from cradle to computer.

...

Info

Open the notepad application from the computer start menu. Perform a test scan in notepad, the scan results should return and display similar to below:

<COUPON>

...